|
WALL
PANEL 2RW2C
2
Returned Edges, 2 Coverplates
NOTES
Panels
finished in a primer for final painting on site by others
with the first coat being applied prior to installation,
or in a factory applied textured powdercoat to any standard
colour.
Timber
grounds by others.
Panels
insulated with 50mm glass fibre class 'o' backed mattress.
Panels
drilled at approximately 600mm centres along returned
edge for fixing with No.7 countersunk wood screws.
Connections
are 15mm, 20mm or 25mm BSP sockets.
Top
and bottom edges returned; side edges guillotined.
Cover
plate manufactured to site dimensions (TSD) after panels
are fixed.
Panels
tested to 700 kPa at works.
Panel
mass is approximately 40 kg/m2.
|
|
|
|
Solray
Steel Wall Panels offer maximum floor lettable space
without sacrificing strength. Robustly constructed,
they are manufactured from mild steel in shapes to suit
the designer's requirements, including panels that contour
the perimeter of curved walls. Steel waterway tubes
specially shaped in a 'D' profile along with 50mm insulation
ensure efficient emission and heat direction.
Click
the icon to view the PDF
|
To
download the data sheet as a PDF follow these
instructions:
1.
Click-and-hold (Win95/98 users right-click)
any 'To View Click Here' link.
2.
From the menu that appears, choose 'Save Link
As...', 'Save Target As...' or 'Download Link
to Disk'.
3.
Choose where you'd like to save the image.
Click 'Save' (if asked to save as either 'text'
or 'source', choose 'source').
|
|
