|
FLOOR
PANEL 4GF1C
4
Guillotined Edges, 1 Coverplate
NOTES
Panel
faceplate to be 14 SWG stainless steel, matt polished.
Timber
grounds by others.
Panels
insulated with 50mm glass fibre class 'o' backed mattress.
Panels
drilled at approximately 300mm centres for fixing with
No.7 countersunk stainless steel wood screws.
Connections
are 15mm, 20mm or 25mm BSP sockets.
All
edges guillotined.
Cover
plate manufactured to site dimensions (TSD) after panels
are fixed.
Panels
tested to 700 kPa at works.
Panel
mass is approximately 40 kg/m2.
Air
vents concealed beneath cover plate.
|
|
|
|
Designed
primarily for the perimeter of office buildings, Solray
Floor Panels offer a strong, attractive solution to
heating requirements. The
panel offers clients the heating outputs they desire
without sacrificing lettable space whilst retaining
a clear view through any full height glazing facades.
Solray
Floor Panels are normally constructed from stainless
steel faceplates or other non-ferrous materials, with
a steel waterway grid for added strength.
Panels
are supplied in natural finishes and therefore do not
require paint application. They can also be supplied
with an embossed facia plate to give additional decorative
finishes.
Click
the icon to view the PDF
|
To
download the data sheet as a PDF follow these
instructions:
1.
Click-and-hold (Win95/98 users right-click)
any 'To View Click Here' link.
2.
From the menu that appears, choose 'Save Link
As...', 'Save Target As...' or 'Download Link
to Disk'.
3.
Choose where you'd like to save the image.
Click 'Save' (if asked to save as either 'text'
or 'source', choose 'source').
|
|
