|
WALL
PANEL 4GW1C
4
Guillotined Edges, 1 Coverplate
NOTES
Panels
finished in a primer for final painting on site by others
with the first coat being applied prior to installation,
or in a factory applied textured powdercoat to any standard
colour.
Timber
grounds by others.
Panels
insulated with 50mm glass fibre class 'o' backed mattress.
Panels
drilled at approximately 300mm centres for fixing with
No.7 countersunk wood screws.
Connections
are 15mm, 20mm or 25mm BSP sockets.
All
edges guillotined.
Cover
plate manufactured to site dimensions (TSD) after panels
are fixed.
Panels
tested to 700 kPa at works.
Panel
mass is approximately 40 kg/m2.
|
|
|
|
Solray
Steel Wall Panels offer maximum floor lettable space without
sacrificing strength. Robustly constructed, they are manufactured
from mild steel in shapes to suit the designer's requirements,
including panels that contour the perimeter of curved
walls. Steel waterway tubes specially shaped in a 'D'profile
along with 50mm insulation ensure efficient emission and
heat direction.
Click
the icon to view the PDF
|
To
download the data sheet as a PDF follow these
instructions:
1.
Click-and-hold (Win95/98 users right-click)
any 'To View Click Here' link.
2.
From the menu that appears, choose 'Save Link
As...', 'Save Target As...' or 'Download Link
to Disk'.
3.
Choose where you'd like to save the image.
Click 'Save' (if asked to save as either 'text'
or 'source', choose 'source').
|
|
